Diesel Driven Mud Pump
Used for a variety of oil industry applications, these 5″ x 6″ or 6″ x 8″ pumps serve many needs. Units feature a dependable 100 horsepower turbocharged Duetz diesel engine with a rugged Harriburge pump end.
Pump Features:
- Electric Start
- 125 gallon diesel tank built into skid
- Lifting eyes, fork lift pockets
- Low oil pressure & temperature shut down system is standard
- Pump has variable bore impeller system for various output pressure scenarios
Electrical Centrifugal Pump
This 3″ self-priming, high volume pump can be mated with a manifold system for cleaning shale shakers, circulating drill water, or circulating drilling mud if needed. Our standard accessory set-up package comes complete with one pump, 150 feet of offshore-approved exane power cord, 25 feet of suction hose, and 50 feet of discharge hose.
Pump Features:
- 20 horsepower
- Pump is capable of pumping 420 GPM
- Units equipped with explosion proof starter boxes
- Can be powered by 3 phase 230 volt or 460 volt power systems
- Approved for offshore use
Diesel Powered Diaphragm Pump
This 3″ pump provides diaphragm flexibility with an air cooled diesel power plant. It features large opening flap valves and a self-cleaning water flow. As is our standard, it comes with a set-up package including one pump, 50 feet of air hose with crow’s foot connectors, 25 feet of suction hose with screen, and 50 feet of soft or hard discharge hose.
Pump Features:
- Capacity to 6000 GPH
- Discharge head to 25 feet
- Pumps up to 1/2″ solid materials
- 3″ suction and 3″ discharge
- Operates at 60 strokes per minute
3″ Air Pumps
For pumping larger solids and more fluid, the Wilden model M15 three-inch air pump is used for pumping non-corrosive liquids. Our standard accessory package set-up consists of one pump, 50 feet of air hose with crow’s foot connectors, 25 feet of suction hose with screen, and 50 feet of soft or hard discharge hose.
Pump Features:
- Non Corrosive Liquids
- Capable of 125 maximum PSIG
- Pumping rate of 230 GPM
- Can handle a particle size of 3/8 inch in diameter
- Zero discharge drip pans optional
- Skid-mounted for offshore use
Poly Chemical Diaphragm Pump
The 2″ Wilden poly-pump is used for pumping corrosive, abrasive, or viscous liquids. When renting this pump, you receive an accessory package including our standard set-up of one pump, 50 feet of air hose with crow’s foot connectors, 25 feet of suction hose with screen, and 50 feet of soft or hard discharge hose.
Pump Features:
- Capable of 125 maximum PSIG
- Pumping rate of 155 GPM
- Can handle particles of 1/4 inch maximum diameter
- Skid-mounted for offshore use
Yanmar Air Cooled Diesel Pumps
The Yanmar 3, diesel-powered pump is air cooled and has a one gallon fuel tank. Our package comes standard with one pump, 25 feet of suction hose w ith foot valve, and 50 feet of soft discharge hose.
Pump Features:
- Air cooled with a one gallon fuel tank
- Allows for 5 hours continuous running time
- Rated at 300 GPM
- Approved and skid-mounted for offshore use
- Zero discharge drip pan is optional